Laundry front loading washer displaying Error Code E11 long fill time.
Issue
- Laundry washer displays Error Code E11.
- Washer long fill time.
- Washer displays code 11.
Applies to
- Front loading laundry washers.
Solution
Error Code E11
Error Code E11 indicates the washing machine isn’t filling with water during the washing phase of the cycle.
Troubleshooting Steps
- E11 may cause the unit to lock for up to 6 minutes.
NOTE: If you unplug the unit and plug it back in, the 6-minute lock will restart. - Make sure the hot and cold lines are not reversed. Hot supply is connected to hot inlet and cold supply is connected to cold inlet.
Note: This is a known installation issue. If your washer was recently installed or moved, have the installer verify the installation was done correctly. - Check water supply requirements.
Please refer to your Use and Care Guide for more information
IF YOU WERE UNABLE TO RESOLVE YOUR ISSUE
- For units installed within the past 30 days, please refer back to your installer to resolve this issue.
- For units installed after 30 days please contact us to schedule service.