Dishwasher Runs Too Long

Issue

  • Dishwasher take too long to start
  • Dishwasher has a long run time
  • Dishwasher takes too long to complete cycle.

Solution

Which cycles and setting are you using?

The run time of your dishwasher can vary based on which cycles and settings you have set.

  • Quick Wash / 30 Minute Wash - approximately 30-60 minutes
  • Normal Wash - approximately 150-180 minutes
  • Heavy Wash - approximately 180 - 240 minutes
  • ECO Mode Settings - approximately 240 minutes
    • Air Dry - approximately 120 minutes
  • Using High Heat / Sanitize / Scour settings will add approximately 60 mins to your cycle.

Has Delayed Start been activated?

The Delay option allows you to automatically delay starting your dishwasher from 1-12 hours.

  • Select your desired cycle and options, then press the Delay button to advance the delay time in one-hour increments until desired time delay is reached.
  • Pressing the delay button displays the delayed time in the status window and illuminates the LED above the Delay button to indicate a delay is active.
  • To cancel the delay start, press the delay time button, wait the time to cycle through the hours till it reaches "0" hours. Some models may very, please refer to your use and care manual for more information.

Home water temperature

If your home takes longer for the water to heat up, this may cause the unit to have a delayed start time. Turning on the kitchen sink and allowing the water to heat up, may help improve the units start time.

Was this article helpful?