Dishwashers - How do I set the delay start feature?
Solution
- The Delay Start option allows you to automatically delay starting your dishwasher for 1 to 24 hours. To activate the Delay Start option, please reference your Owner’s Manual, as the functionality may vary by model.
- In most cases, you will simply activate the Delay Start option by pressing DELAY START until the desired delay time shows in the display window on your dishwasher. Press START to start the delay option.
- To cancel the DELAY START option and begin the cycle before the delay period is over, press and hold START/CANCEL for a few seconds and close the door.
Was this article helpful?
Related Articles
- Dishwasher Error Code PF - Loss of Power
- Dishwashers Flashing Lights
- Why is water in the dishwasher after it runs?
- Dishwasher Glass Trap and Filter Guide
- Dishwashers - How do I start my dishwasher?
- Dishwasher Error Codes and Alarms Guide
- Dishwasher Runs Too Long
- Dishwashers - Not Draining
- Dishwasher Error Code Hd or HO - Heat delay or heater on mode activated
- Dishwasher Error Code i20 - Unit did not drain properly
Related Articles
- Dishwasher Error Code PF - Loss of Power
- Dishwashers Flashing Lights
- Why is water in the dishwasher after it runs?
- Dishwasher Glass Trap and Filter Guide
- Dishwashers - How do I start my dishwasher?
- Dishwasher Error Codes and Alarms Guide
- Dishwasher Runs Too Long
- Dishwashers - Not Draining
- Dishwasher Error Code Hd or HO - Heat delay or heater on mode activated
- Dishwasher Error Code i20 - Unit did not drain properly