Gas Cooktop Ignition Port Cleaning Guide

Issue

  • Gas ignition ports are dirty or clogged
  • Gas cooktop not igniting

Applies to

  • Gas Cooktop
  • Gas Range

Solution

missing alt text

Cleaning Instructions:

  1. For burnt-on and dried spills, apply hot soap and water to the soiled areas. Allow time for the soil to soften before wiping clean. DO NOT use abrasive cleansers, oven cleaners, or steel wool on the cooktop around the burner head. These products can damage the cooktop finish.
  2. Use a soft bristle brush to clean all over the burner head. DO NOT use brushes on cooktops, it can damage the surface.
  3. Use a soft bristle brush to clean out all slots and holes on the burner head.
  4. Use a toothpick, paperclip, or ignition port cleaning brush to clear out any blockage from the ignition port
  5. Wipe clean with a soft, clean cloth or sponge, a scratch-free cleaning pad, or toothbrush

NOTE: Before using the cooktop again, make sure the burner caps are properly placed and seated on the burner heads

Was this article helpful?